I went from Unifi to Ruckus APs and never looked back.
You can find older generations on eBay very inexpensively for what they are, install Ruckus Unleashed firmware on them, and operate them completely locally.
They have the best beamforming antennas in the industry and their firmware is rock solid. I'm on some very old models (2.4ghz and 5ghz only) but they work fantastically well. I'll probably upgrade to some wifi 6 models soon.
But for my uses 500-600mbps rock solid throughout my house is plenty. Anything where I want max throughput/low latency/low jitter (mainly gaming) is hardwired. For wifi I care much more about complete and consistent coverage.
I used git5 from when I started in 2011 to when I left in 2017.
I'm going back starting on monday, so I'm curious to try out jj.
In the past 10 years it's all been github and gitlab, and their code review tools are so painful, specifically w.r.t. tracking discussions across revisions. I never felt excited to try out jj because I was afraid it would that situation even worse.
I agree, I've fantasized about an editor with a truly pluggable editing model which is decoupled from the other parts.
Yi was kind of designed like this, I believe. You could compile in an emacs-like model, a vim-like model, or presumably make your own model.
I've used Helix and Kakoune in addition to Emacs and Vim, but dealing with the limitations/featureset/plugin treadmill gets a little tiring.
I have been following Zed, and it seems that they have rearchitected things to enable adding Helix mode and making the editing model a bit more modular, but it's still fairly new. They are fixing bugs pretty quickly. I will have to try it again.
I prefered Kakoune to Helix (it was more consistent). But to your point, being able to swap these things out more easily would let you choose an editor based on features, and not tradeoff between features and an ergonomic editing model.
Ironically you can use Ki inside of VSCode (and I know you can use Vim that way too), but VSCode is so darn bloated and slow...
The truly pluggable editor is emacs.
I too spent months trying out neovim, then emacs, then finding helix. Spent a year on helix, then zed because I would rather have something more complete, and brought with me all i could of helix modal editing.
But emacs. Emacs is the one that can truly become anything you like. And with lsp and treesitter being finally in it. I've finally came to my senses and started building my helix in it.
This reminds me of https://en.wikipedia.org/wiki/Venti_(software) which was a content-addressible filesystem which used hashes for de-duplication. Since the hashes were computed at write time, the performance penalty is amortized.
+1 to 0.3mg, larger doses can lead to nightmares and other issues.
It also may take longer to have an effect than is commonly said. For me, it's ~3-4 hours. I'm a natural night owl but 0.3mg melatonin at 6pm has me falling asleep on the couch at 9:30-10pm.
Like, I get it, it's a good feature, it caught quite a lot of typos in my code but can I please get an option to turn this checking off e.g. in unit tests? I just want to yank some APIs, look at their behaviour, and tinker a bit with the data.
This example isn't particularly good code. If you've got "lots of code" that names a bunch of variables (e.g. using ':=') that are never referenced AND you have a good reason not to do so (which I doubt: given this context it looks like an incomplete test), then predeclare these 'excess' variables:
func TestWhatever(t *testing.T) {
var resp3, resp4, fooBefore, subFoo, bar2, barNew, zap2 theirType
// ...lots of code
}
Alternatively, use '_' where they are being defined:
// instead of
resp2, err := doit()
// use
_, err := doit()
If, and given this context it's likely, you're checking these errors with asserts, then either change the name of the error variable, predeclare the err name (`var err error`), or split it into multiple tests instead of one giant spaghetti super test.
That said, in a code review, at a minimum, I would probably ask that these variables be checked for nil/default which would completely eliminate this problem.
This is not a piece of code I would commit, obviously! It's a piece of code in the middle of being written and re-written (and re-run, a la REPL), and constantly replacing "resp2" with "_" and back again with "resp2" is friction. Go doesn't have REPL but having a TestWhatever(t *testing.T) function is a mostly good enough replacement, except for this one small problem.
Whew, that's a relief! If I understand correctly, then I think you'll have a better experience if you practice doing something like this when writing tests:
foo, fooErr := doit()
require.NotNil(foo)
require.NoError(fooErr)
_, _ = foo, fooErr // alternative if you don't want the asserts for some reason, remember to come back later and delete though
// ...repl churn code...
Using the stretchr/testify/require package. This code defines both variables, gives the error a unique name in the scope, and then references the names in two asserts. You won't have to deal with unreferenced name errors in the "repl churn", so you can comment/uncomment code as you go.
The good news is if you use Nix or Guix it’s relatively easy to hack your local build of the compiler to demote the unused variables hard error to just a warning.
It's really not. Yes it's possible to figure out how to build and install the Go compiler, but then you have to repeat that process every time you want to upgrade to a new version. With Guix (I assume Nix is similar) you just save the patch somewhere and then run `guix install --with-patches=go=/path/to/patch go` and everything just works (including reapplying the patch on upgrade).
All of this could've been prevented if Go just had two ways to compile. Debug and release.
The go devs decided against this since they didn't want to build a highly optimizing (read: slow) compiler, but that is missing the point of developer ergonomics.
It could be prevented in an even simpler way: emitting warnings.
Most people nowadays ban building with warnings in CI and allow them during local development. But “CI” was barely a thing when go was developed so they just banned them completely. And now they are probably too stubborn to change.
As an outsider to Go, it feels to me like this basic pattern comes up over and over again in Go:
Q. Why can’t I have feature X?
A. We thought of that already, and your opinion is wrong.
Q. But basically every other language in existence supports this. And it makes development easier. We would really, really like it. Please?
A. Apparently you don’t get it. Here’s a pointer to a 15 year-old post on a mailing list where the first time someone asked for this, we said no. Your opinion is wrong.
I wish I could pay money to hide amazon ads on our echo show devices and not auto-opt-in to each new "experience" pane they add. They let you do it for Kindle ads and now for Prime, maybe it'd be a nice cash injection for the faltering Alexa org?
Really, I just want our smart displays (which I paid real money for) to show our family photos and do smart home things. It's exhausting to repeatedly have to open up the settings panel and uncheck whichever new screens/"experiences" they've added each time they start popping up. There are dozens at this point--talk about shipping your org chart!
Hopefully Matter will mature at some point and Apple will ship some smart displays of their own, and then we can toss our Alexas in the bin.
Google's displays are fairly decent. No ads, can cast Home Assistant dashboards onto them (with functional touch), and the 1st gen hubs sell for around ~$30 and 2nd gen around ~$50.
Looking at their site, they apparently even make a vodka drink with them now. Uh, caffeine & alcohol drinks is usually not very well received by the government here. I wonder if it'll stir some political drama.
You can find older generations on eBay very inexpensively for what they are, install Ruckus Unleashed firmware on them, and operate them completely locally.
They have the best beamforming antennas in the industry and their firmware is rock solid. I'm on some very old models (2.4ghz and 5ghz only) but they work fantastically well. I'll probably upgrade to some wifi 6 models soon.
But for my uses 500-600mbps rock solid throughout my house is plenty. Anything where I want max throughput/low latency/low jitter (mainly gaming) is hardwired. For wifi I care much more about complete and consistent coverage.